Just after introducing the Svelt XC tire at Sea Otter, we caught Onza with another new tread at the Riva del Garda Mountain Bike Festival. The upcoming Onza Canis 27.5 x 2.85 is their first entry into the plus-sized tire market, but it’s coming in at a competitive weight for the category. At 840g claimed, […]
The post New Onza Canis 27.5 x 2.85 puts a lightweight bite into Plus mountain bike tire segment appeared first on Bikerumor.
Over the past couple years, DT Swiss has scaled back their suspension offerings, focusing on the shorter travel end of the spectrum. The new R414 rear shock, however, has a huge range of uses from XC to light enduro and could be considered the start of DT’s phase two suspension effort. It has a larger air […]
The post DT Swiss adds high volume R414 rear shock, sneaks in stealth “plug-in” thru axle appeared first on Bikerumor.
Filed under “light on the details, but coming soon” are new wide carbon rimmed mountain bike wheels from Acros. Two versions will be offered, both using the new tubeless ready, hookless 30mm (internal) wide carbon fiber rims. The difference between the Race and Enduro versions will be the hubs and the spoke counts… A deep […]
The post Acros adding wide carbon Race, Enduro mountain bike wheels appeared first on Bikerumor.
With all the new products flying out of Sea Otter you would think we’d seen it all. Shimano has been busy to say the least. Though it’s obvious e-bikes are here to stay, nothing validates it more when Shimano develops a complete XT-level e-bike drivetrain. Surprising us even further, after SRAM kills off the front […]
The post Week in review: Shimano’s E-bike & XT touring drivetrain, Canonndale redefines XC plus much more! appeared first on Bikerumor.
Introduced at the Riva del Garda Mountain Bike Festival, the all-new 2017 Cannondale Scalpel Si goes further than ever down the “Systems Integration” path to become a far more capable XC race bike. One capable of the increasingly rough courses at on World Cup circuit. Fortunately, there’s a massive spread of price points and builds to […]
The post 2017 Cannondale Scalpel Si – Build specs, pricing, sizing & options appeared first on Bikerumor.
Experience the epic of British Coumbia with the Singletrack 6 – Ride Western Canada and take part in the multi-day cross-country mountain bike adventure this summer. TransRockies has just confirmed the dates and locations of this year’s six-day BC epic set for July 23-28. The event delivers back-to-back big mountain stages with separate timed descents through the heart of the beautiful […]
The post Friday Roundup – Cycling Odds & Ends appeared first on Bikerumor.
On the surface, Raleigh’s new Stuntman looks to be a fun bike no matter what. But if you’re old experienced enough to remember The Fall Guy (admittedly I had to look it up), then this brown beauty will make even more sense given its inspiration from Colt Seavers’ pick up. Supposedly one of the last projects to involve […]
The post SOC16: Raleigh cranks out drop bar fun with fat tire, dropper equipped Stuntman, Steel RXM, Kid’s CX, More appeared first on Bikerumor.
This is it. The day in April mountain bikers wait for all year. A day of celebration, a day of smoking… tires? That’s right, it’s International 429 Day. A day that celebrates the fun nature of the Pivot Mach 429 Trail. To honor the occasion, Brice Shirbach loads up and heads to the woods in […]
The post Video: Pivot celebrates International 429 Day, Maxxis stays planted on the shore with Plus appeared first on Bikerumor.
Forget e-bikes, where we’re going, we won’t even need wheels. We’ve covered some of Colin Furze’s bonkers inventions in the past like the pulse jet powered bike, but this really may be his wildest creation yet. Apparently inspired by Ford UK’s #unlearn campaign, the Hoverbike started as a suggestion from the internet. With no prior experience […]
The post Ride of the future? Colin Furze actually builds a working Hoverbike appeared first on Bikerumor.
Hot on the heels of their new XT-level STePS MTB e-bike drive system, Shimano has another XT group expansion to share. This new T8000 series broadens the reach of XT to deliver top-level drivetrains adapted specifically for trekking and proper bike touring. The top-tier of these bikes had been often built up with XT groups […]
The post Shimano XT goes on Tour with new T8000 trekking group appeared first on Bikerumor.
While their Indy SL from about 1997 was their lightest fork ever, SID was their first fully modern, lightweight air sprung fork. It’s seen several revisions over the years, going from a minimal 30mm stanchion to the current 32mm, and travel jumping from a minimum of 68mm at launch up to a max of 120 […]
The post Rockshox SID goes back to XC roots with lighter, stiffer race-ready design appeared first on Bikerumor.
Often on the last grueling climb of the day, you say to yourself, “the harder I push, the better that beer is gonna taste”. Trail head or “half-way” beers with friends isn’t as good as the ride… it’s part of it! Transition Bikes took it a step further and partnered up with a local brewery […]
The post Beer Roundup: Transition Bikes “Party iN the Woods IPA, Thomson insulated beer bag & more! appeared first on Bikerumor.
Photo submitted by Paolo Vettori, “My wife on a summer Slovenian tour around the ‘Baska Grapa’ Valley. One of the best uphill you can do. Wonderful place.” We always love to see your photos and would like to show them to the world here on the Pic Of The Day. Send in your photo with a brief […]
The post Bikerumor Pic Of The Day: Baska Grapa Valley – Slovenia appeared first on Bikerumor.
Cross country courses are getting more technical and more challenging. If you haven’t been to a World Cup race lately to see for yourself, you can simply take the fact that more and more of the top racers are aboard full suspension as evidence of that. Cannondale’s no newcomer to racing full suspension at the […]
The post All-new Cannondale Scalpel puts another X in XC w/ lighter, faster & more capable frame appeared first on Bikerumor.
Locksmith scams are common all over the country. Thus, it is important to be aware of the potential locksmith scams around. Here are some tips that will help you avoid locksmith scams, such as: checking locksmith ID and licensure, asking question and watching out the fluctuation bids.
Below are 3 tips to avoid locksmith scams:
Check Locksmith ID and Licensure
Before even contacting them, check their ad and website for an address. Look for accreditation such as from ALOA (though a lot of genuine locksmiths are not members). Then check Google and directory listings for customer reviews.
When you phone them, ask where they or their technicians are based (again, checking the address), whether they are licensed and what the registered name of the business is. End it here if you’re not satisfied with the replies. Source: Scambusters.org
Ask Questions
Most consumer complaints concern fees that were not disclosed when they called the locksmith. Ask about the cost of a service call, mileage and parts before you agree to have the work performed. Get an estimate before any work begins, including emergency service. If the on-site estimate doesn’t match the price quoted on the telephone, have the job done by someone else.Source: BBB.org
Watch Out for Fluctuating Bids
If the locksmith’s on-site price doesn’t match the phone estimate, don’t allow the work to be performed.
Some locksmiths may demand payment after doing shoddy work or inflating the bill, and threaten to call the police or file a lawsuit if you don’t comply.
If that happens, call their bluff. Let them call the police, or offer to call for them. A reputable company won’t drastically change a quoted price, Colorado Attorney General Cynthia H. Coffman says.
“The people who are making those threats generally have the most to lose, because they’re not operating within the law, and their actions are not ethical. They’re bullying,” Coffman says. Source:Angieslist.
The post 3 Tips to Avoid Locksmith Scams appeared first on Mr Locksmith Vancouver.
Locksmith scams are common all over the country. Thus, it is important to be aware of the potential locksmith scams around. Here are some tips that will help you avoid locksmith scams, such as: checking locksmith ID and licensure, asking question and watching out the fluctuation bids.
Below are 3 tips to avoid locksmith scams:
Check Locksmith ID and Licensure
Before even contacting them, check their ad and website for an address. Look for accreditation such as from ALOA (though a lot of genuine locksmiths are not members). Then check Google and directory listings for customer reviews.
When you phone them, ask where they or their technicians are based (again, checking the address), whether they are licensed and what the registered name of the business is. End it here if you’re not satisfied with the replies. Source: Scambusters.org
Ask Questions
Most consumer complaints concern fees that were not disclosed when they called the locksmith. Ask about the cost of a service call, mileage and parts before you agree to have the work performed. Get an estimate before any work begins, including emergency service. If the on-site estimate doesn’t match the price quoted on the telephone, have the job done by someone else.Source: BBB.org
Watch Out for Fluctuating Bids
If the locksmith’s on-site price doesn’t match the phone estimate, don’t allow the work to be performed.
Some locksmiths may demand payment after doing shoddy work or inflating the bill, and threaten to call the police or file a lawsuit if you don’t comply.
If that happens, call their bluff. Let them call the police, or offer to call for them. A reputable company won’t drastically change a quoted price, Colorado Attorney General Cynthia H. Coffman says.
“The people who are making those threats generally have the most to lose, because they’re not operating within the law, and their actions are not ethical. They’re bullying,” Coffman says. Source:Angieslist.
The post 3 Tips to Avoid Locksmith Scams appeared first on Mr Locksmith Vancouver.
Before you start looking for window coverings, it’s important that you understand the difference between binds and curtains. Read below to learn more.
Blinds – Blinds are not just about keeping heat in but they are a means to filter light in and out of the room. Blinds are a great way of stopping direct light coming into the house, without blocking out the view or making it feel like night time. Blinds are mostly installed inside the home but they don’t have to be. Blinds can be made of Wood, Aluminium, Fabric and plastic. Blinds usually come down across the window horizontally from a cord or pulley
Curtains – Curtains are all about keeping warmth inside the home, blocking out the sun from over heating the house, privacy and protecting your house and furniture from fading. Curtains are about light, keeping it in or keeping it out.
Curtains are always installed on the Inside of the House and comes across the window vertically. Source: Quora
Blinds -From translucent roller blinds to romans and timber venetians, the enduring beauty of blinds is their ability to control light – and disappear when required. “Roller blinds are a great solution for achieving light control with minimal design impact,” says Andrea D’Cruz. A less-formal style of window treatment, they tend to be relegated to family areas, where blockout styles offer UV protection by day and added insulation at night. Motorised roller or panel glides also make them easy to control over large spaces. While see-through styles diffuse light without losing the view, in winter, “The most important thing is to make a large room feel cosy,” says Paul Hecker, who often layers blinds beneath curtains. He prefers soft roman blinds, which can be sheer, textured or bonded with a blockout fabric.
Curtains – Whether you like heavy drapes or soft sheers that billow in the breeze, “Curtains can be used to frame a window, layer a room or add warmth, movement and texture,” says Paul Hecker, director of Hecker Guthrie. Traditionally kept to bedrooms and formal living areas, there’s a growing trend for sheer and motorised curtains in open-plan living spaces. The most style-savvy homeowners are also embracing muted colours and folk- and floral-inspired prints. “We will be seeing a shift towards ‘beautiful’ fabrics and a softness that moves us away from minimalism,” says Toby Gray, director of BQ Design. Organic grey shades now offer a modern update on cream and white, and richer hues can be introduced to complement a room’s colour palette. The only rule? “Curtains should always touch the floor,” says Paul. Source: Homelife
If you want to enhance your home’s interior with new window coverings, make sure you come and visit us here.
Contact:
Universal Blinds
601 – 1550 W. 10th Ave
Vancouver, V6J 1Z9
Canada
Phone: (604) 559-1988
The post Difference between Blinds and Curtains appeared first on Universal Blinds, Shades & Shutters.
If you are considering a custom home there are numerous decisions you have to make including what type of logs and timbers to build with? When building a custom home, it’s very important to select the best wood species for your project in order to maximize overall durability, while minimizing cost. Today we are going to look at two of the most popular types of cedar, Western Red Cedar and Alaskan Yellow Cedar. Known for their rich aromatic and being highly decay resistant We will look at the advantages and disadvantages of building with each and the costs associated.
Western Red Cedar is also known for their flared butt ends that offers a unique character to many log homes both inside and outside. If you like this type of look and feel for your home western red cedar may be the best type of timber for your home. If you don’t particularly like this look you can still use red cedar without flared ends.
Considerably harder when dry than most commercial softwoods, and therefore much stronger, AYC has excellent strength and wear properties as well as great impact resistance. It is suitable for all types of joinery and carpentry due to its appearance, durability and easy working characteristics. This wood is so easy to work that it has become prized for applications such as joinery and carpentry, decorative panelling, furniture, mouldings and cabinetwork. It also withstands constant wear and load impacts without forming ridges or splitting, and does not splinter.
One of the disadvantages of Alaskan Yellow Cedar is the ability to sourcing large diameter high quality wood. For this reason many builders choose red cedar over yellow cedar.
This chart compares the average cost of Western Red Cedar vs. Alaskan Yellow Cedar depending on the style of timber home you choose:
| Western Red Cedar |
Western Red Cedar w/Flared Ends |
Alaskan Yellow Cedar | |
| Full Scribe | $55-$75 | $65-85 | $50-$60 |
| Post & Beam | $40-$65 | $45-$70 | $35-$55 |
| Timber Frame | $55-$65 | N/A | $40-$55 |
We hope this has given you a better understanding of the differences between the two cedar options available, and why we choose Western Red Cedar. If you have any specific questions we would be happy to discuss them. Please feel free to email us: info@artisanlog.com.
If you would like to know more about the cost associated with building your custom log home you may want to read these articles as well:
Bathroom vanities are extremely useful and are the best addition to bathroom decor. If you’re planning to have one of these, then here are a few ideas for you.
Glass Bathroom Vanity
At any clear finish or frosted tempered glass provides a single, sleek and modern, as well as the set of bathroom vanities. This is one of the easiest surfaces to clean and has very good tolerance of heat does not dissolve or burn, if you forget the curling iron out! Tempered glass isalso a non-porous surface, bacteria and germs have no place to grow, which is hygienic and resistant to stains. Another advantage of glass is that you will not need to worry about communication with your bath or color, because it is a different material, each device color (white or bone) game. Finally, the most dramatic for the bathroom remodeling project to install lights beneath the surface of tempered glass to add. Source: ModernBathroom
Double Bathroom Vanity
Double sink vanities are often seen in home design magazines. They are extremely stylish and provide a fantastic combination of form and function. Double sinks look great when they fit the dimensions of the room nicely; they also provide personal space in the bathroom for individuals living together in the same house. A bathroom vanity with two sinks is very practical. Two people can save a considerable amount of time just by having two sinks in one bathroom. The basic components of a double sink vanity include the countertop, cabinet, basins, fixtures, and hardware such as knobs and drawer pulls. You have two options, you can look for each item individually or you can look at furniture style complete vanities. Source: Ezine
Floating Bathroom Vanity
The main advantage of a floating vanity is the illusion of space it creates in the room; the room seems bigger because of the light that passes beneath it. In a small bathroom where space is already a premium, adding strip or spot lighting beneath the floating vanity helps to enhance the illusion of additional space. It also makes the bathroom less cluttered and simpler, rendering it easier to keep clean, a plus in any home. Source: Home
While selecting vanities for your home, you need to consider several things such as the size of the bathroom, as well as your budget along with the rest of decor. If you want more suggestions, please contact us here.
Contact Us:
Perfect Bath
Phone: Toll Free 1-866-843-1641
Calgary, Alberta
Email: info@perfectbath.com
The post Types of Bathroom Vanities and Their Benefits appeared first on Perfect Bath Canada.
With Red Bull Rampage titles, racing trophies from several disciplines, freeride video parts and everything in between it’s safe to say Kyle Strait is a pretty well-rounded rider. While some pros opt to set up a quiver of different bikes, Strait wanted one bike he could ride in either slopestyle, 4X or dual slalom events. […]
The post Commencal creates the Absolut SX Kyle Strait for multi-disciplinary madness appeared first on Bikerumor.
Are there enough wheel companies out there already? If you’re Colin Esquibel, the answer is no. After leaving his position with Box Components, Colin told us he had something in the works, and at Sea Otter we got a first look – wheels. Why another wheel brand? Simply because Colin believes they can create a […]
The post SOC16: Sped Precision speeding towards new wheel brand with mountain, CX options appeared first on Bikerumor.
Shimano is making the jump to electrify mountain bikes as they have now developed a new trail-specific version of their STePS e-bike drivetrain that they are calling STePS MTB. The all new e-MTB components are designed to deliver XT-level fit and finish to get to riders serious about riding off-road, but who are looking to […]
The post Shimano takes eBikes off-road with XT level STePS MTB appeared first on Bikerumor.
The new Supreme cassette hub from WeThePeople is a bit of an interesting innovation with its new freehub design that inverts the cassette driver internals to overcome some typical hub limitations and add more flexibility. By putting the pawls inside the hub (instead of on the cassette body), and in a symmetric configuration that can be flipped around, […]
The post WeThePeople Supreme hubs flip the BMX cassette driver inside out appeared first on Bikerumor.
How do you make a splash at a tradeshow after all your bikes have already been released? Custom paint is a good start. Even better when that custom paint includes wild designs that are done by hand. Even better – this over the top Tracer 275 may actually appear in an upcoming commercial for the […]
The post SOC16: Intense highlights bikes w/ wild designs including BMW inspired drawings, bright colors, & camo appeared first on Bikerumor.
Like so many other bikes, Litespeed’s T5G is adapting in an attempt to stay current. In this case that means the addition of the T5G Flat Mount, a bike with, you guessed it – flat mount disc brakes. But along with the new brake standard there are a few more details that will keep the […]
The post SOC16: Litespeed updates gravel bike with new flat mount, 12mm thru axle T5G appeared first on Bikerumor.
If you were offered a brand new pair of carbon crank arms for $100, would you feel a bit skeptical? One thing riders never want to do is save a few bucks (or grams) on a part they don’t fully trust to perform. However, manufacturers constantly struggle to find cheaper, yet effective means of producing […]
The post Carbon.Bike offers inexpensive, lightweight components thanks to forged carbon construction appeared first on Bikerumor.
Photo submitted by Yitzy Spinner, “My nine-year-old son Gavi and I took a nice 52 mile ride the other day. We rode across this bridge in Yorktown, NY and needed to stop for a photo.” We always love to see your photos and would like to show them to the world here on the Pic Of […]
The post Bikerumor Pic Of The Day: Yorktown, NY appeared first on Bikerumor.
Back at the Berlin Bike Show we had a chance to sit down and chat with the Dresdeners who run Veloheld. They had some updates to the multi-purpose steel cyclocross bike that we had tested two seasons ago, plus a couple of other updated bikes and an all new singlespeed and city bike. The new belt […]
The post BFS 2016: Veloheld gives a peek at new singlespeed cross AlleyX, urban Path, and more appeared first on Bikerumor.
Sure it sounds like a typical first world problem. Oh I have so many extra wheelsets, I don’t know where to put them all! Really that’s what you are complaining about? But now between cyclocross racing with tubulars that may get put away for 8 months a year, and the recent crop of mountain bikes that […]
The post Store your spare wheels better with Offset appeared first on Bikerumor.
Even though the prevalence of dropper posts has cut into the market for SDG’s I-beam saddle system, the company is still pushing forward with new designs. Thanks to the design’s toughness and range of adjustment, they are still hugely popular for downhill, dirt jump, XC and other mountain bikes that aren’t running dropper posts. But […]
The post SOC16: SDG updates I-Fly with big wheel friendly 2.0, adds Fly Mountain, Shibuya Dazzle colorway, more appeared first on Bikerumor.
One saddle does not fit all. Like shoes, they come in different sizes, shapes and styles. The longer you ride your bike, the more important your saddle becomes and it may be one of the most important pieces you consider. If you’re not comfortable, you won’t want to ride your bike as much. Then there is the whole […]
The post Saddle Roundup: FlexCy and 3 West offer a different take on how you sit on your bike appeared first on Bikerumor.
The last time we checked in on 6D’s revolutionary trail helmet, it was still mostly a 3D printed prototype. Fast forward a few months and now the finished helmets are in production and headed to store shelves. What makes the newly named 6D ATB-1T (changed from ATB-1A) different? Instead of a single EPS liner with […]
The post SOC16: 6D ATB-1T helmet gets real, headed for stores and your head for better protection appeared first on Bikerumor.
Kona has been on a roll lately with well equipped bikes at attainable prices, and it doesn’t look like they’re slowing down for 2017. We’ve been riding the current aluminum Hei Hei DL Trail for awhile, and while the full review will reveal that it’s quite a good bike, never the less we’re excited to […]
The post SOC16: Kona gives a sneak peek at 2017 bikes including carbon Hei Hei DL, Big Honzo and Kahuna, more appeared first on Bikerumor.
We first had a look at the design overhaul of the cross-country and completely new all-mountain pedals from Ritchey Logic last fall at Eurobike, but now it looks like they are ready and making their way out and under the feet of trail riders. Both pedals build on years of smooth running of their previous Paradigm pedal […]
The post Updated Ritchey WCS Trail & XC mountain pedals avaiable appeared first on Bikerumor.
It’s only been about a week since we got a sneak peek at the hydraulic disc brake SRAM eTap group in testing when we were out in California for Sea Otter, and now we have another shot of it out in the real world. But this view comes with something even better, the added bonus of […]
The post Instagram Peek: Upcoming Canyon Aeroad SLX Disc & more SRAM eTap Hydro appeared first on Bikerumor.
The Schwinn Vantage RX1 might just be the bargain bike of the show. Coming in at just $1,599, there’s not a generic part to be found. Instead, you’ll find name brand bits from SRAM, Formula, Fizik, FSA, VP and more, plus a new flared drop bar to improved ergonomics. All hung on a custom butted […]
The post SOC16: Schwinn Vantage RX1 city bike drops the bar (and one heck of a disc brake deal) appeared first on Bikerumor.
Fueling our mad dash through four days of Sea Otter is often left to breakfast burritos, dinner burritos, and tacos after hours. The in between time is usually covered by whatever snacks are chopped into bite-size samples (or the occasional piece of fruit, tri-tip, sausage or chicken salad from kind folks like Hayes, KS, Bike […]
The post SOC16: Tasty new treats from Honey Stinger, Ryno, Untapped, GU, Bonk Breaker, Clif & more! appeared first on Bikerumor.
Knowing Silca doesn’t do things on the average, when we saw they are releasing their own tubeless kit for road, we knew there would be some extra attention to detail. And we were we right! Check out how they made a better valve stem that is lighter, stronger & cheaper more aerodynamic, as well as their […]
The post Silca releases premium tubeless kits with aero valve system & carbon friendly platinum tape appeared first on Bikerumor.
Photo submitted by Jim Richards of Columbus, GA, “Specialized Roubaix on Mt. Cheaha, (the highest point in Alabama, USA). Mt. Cheaha is home of the Cheaha Challenge Grand Fondo featuring 10,000′ of climbing over 100 miles.” We always love to see your photos and would like to show them to the world here on the Pic […]
The post Bikerumor Pic Of The Day: Mt. Cheaha, Alabama appeared first on Bikerumor.
Keyless locks give homeowners more control over their own security. Thus, it provides wide varieties of benefits such as: convenience, high security and improved lifestyle.
Below are 3 benefits of keyless locks:
Convenience
With keyless door locks, you no longer have to search your pockets or fumble around in your bag to find your keys. Instead, you can unlock the doors with your mobile device or press the button on your key fob before you even get out of your car. This is especially helpful if you have grocery bags in your hands and can’t dig through your purse to find the house key. We all know your cell phone is more likely to be in your hand anyway.
Keyless door locks can help if you’re concerned about being alone outside for too long, especially in the dark. Also, if it’s storming or freezing cold, you’ll get into the warm, dry house quicker by not having to dig for your keys. Source: SafeWise
High Security
Preventing trouble before it occurs is one of the best security benefits of keyless locks and access control. Yes, these security systems are great for ‘fixing’ a problem, but we’d rather see you avoid one in the first place.
When your keys are out of your possession — valet your car, leave your keys on your desk — they can be copied. This gives someone who would wish you, your family, your children, or your employees harm, the opportunity to do so. Keyless locks let you take your keys out of your pocket, out of your purse, off your key ring, and out from under your special hiding place. Source: GoKeyLess
Improved Lifestyle
One of the main advantages of a keyless door lock is not needing to carry a key. You’ll no longer need to worry about losing your key or fidgeting at the door to get it open.
It also means that you won’t need to store a spare key somewhere on your property, as many homeowners currently do. Because most criminals are used to looking around to find a spare key, eliminating the need for one will help make your home safer.
Another advantage of keyless door locks is that you can provide entry to your home for others at your discretion. You will not need to make copies of a key or leave keys for dog walkers, housekeepers, or house guests to get in to your home. Rather, you’ll simply need to tell those people the proper code in order to gain access. Source: DoItYourself
If you want more information about how keyless locks can help you in securing your home or property, please give us a call or contact us here.
Contact:
Mr. Locksmith Vancouver
555 West Hastings Street
Vancouver, BC V6B 4N4
Phone: (604) 239-0882
The post 3 Benefit of Keyless Locks appeared first on Mr Locksmith Vancouver.
Keyless locks give homeowners more control over their own security. Thus, it provides wide varieties of benefits such as: convenience, high security and improved lifestyle.
Below are 3 benefits of keyless locks:
Convenience
With keyless door locks, you no longer have to search your pockets or fumble around in your bag to find your keys. Instead, you can unlock the doors with your mobile device or press the button on your key fob before you even get out of your car. This is especially helpful if you have grocery bags in your hands and can’t dig through your purse to find the house key. We all know your cell phone is more likely to be in your hand anyway.
Keyless door locks can help if you’re concerned about being alone outside for too long, especially in the dark. Also, if it’s storming or freezing cold, you’ll get into the warm, dry house quicker by not having to dig for your keys. Source: SafeWise
High Security
Preventing trouble before it occurs is one of the best security benefits of keyless locks and access control. Yes, these security systems are great for ‘fixing’ a problem, but we’d rather see you avoid one in the first place.
When your keys are out of your possession — valet your car, leave your keys on your desk — they can be copied. This gives someone who would wish you, your family, your children, or your employees harm, the opportunity to do so. Keyless locks let you take your keys out of your pocket, out of your purse, off your key ring, and out from under your special hiding place. Source: GoKeyLess
Improved Lifestyle
One of the main advantages of a keyless door lock is not needing to carry a key. You’ll no longer need to worry about losing your key or fidgeting at the door to get it open.
It also means that you won’t need to store a spare key somewhere on your property, as many homeowners currently do. Because most criminals are used to looking around to find a spare key, eliminating the need for one will help make your home safer.
Another advantage of keyless door locks is that you can provide entry to your home for others at your discretion. You will not need to make copies of a key or leave keys for dog walkers, housekeepers, or house guests to get in to your home. Rather, you’ll simply need to tell those people the proper code in order to gain access. Source: DoItYourself
If you want more information about how keyless locks can help you in securing your home or property, please give us a call or contact us here.
Contact:
Mr. Locksmith Vancouver
555 West Hastings Street
Vancouver, BC V6B 4N4
Phone: (604) 239-0882
The post 3 Benefit of Keyless Locks appeared first on Mr Locksmith Vancouver.
Having a security system for your business is a big help in protecting your investment. These articles will discuss some tips to help you choose the right security systems for your business.
Below are 3 tips for choosing the right business security systems:
Conduct a Security Review
Since small business owners cannot afford to leave any of their valuable assets —including customer data, inventory and computers — unprotected, many install security systems as a first line of defense against thieves. Small business owners need to know the right questions to ask before plunking down money on equipment and ongoing monitoring.
The types of features and function of an alarm system can vary greatly by the type of business being protected, experts said. A reputable alarm company will perform a site survey before recommending an alarm system or any security equipment. Source: BusinessNewsDaily
Select Security System Solutions
Select solutions to the problem areas in your security system. Address lighting problems by adding motion-sensing lights to your property and removing obstructions like excessive plant growth. Add security cameras to keep sensitive areas under surveillance and use a digital video recorder to keep extended surveillance records. Upgrade locks on entrances and windows. Purchase time-clocks to keep track of employees coming and going. Multilayer your security system. Especially sensitive areas should be protected by locks, security camera surveillance and alarms. Source: Overstock.com
Other Factors to Consider
Another factor to consider is whether you want to be able to control the security features of your business off-site, whether you’re at a conference for a few days, or just home at night looking to make sure all is well at work. You could also choose to give access to these types of controls to certain employees. The choice is yours.
You’ll also want to decide whether a wireless or wired security system is the best fit for your business. If you’re in the planning phases of creating office space, workspace, or a storefront, consider security systems now. Source: AlarmRelay
Contact:
Mr. Locksmith
555 W. Hastings St
L21A
Vancouver BC V6B 4N4
Canada
Having a security system for your business is a big help in protecting your investment. These articles will discuss some tips to help you choose the right security systems for your business.
Below are 3 tips for choosing the right business security systems:
Conduct a Security Review
Since small business owners cannot afford to leave any of their valuable assets —including customer data, inventory and computers — unprotected, many install security systems as a first line of defense against thieves. Small business owners need to know the right questions to ask before plunking down money on equipment and ongoing monitoring.
The types of features and function of an alarm system can vary greatly by the type of business being protected, experts said. A reputable alarm company will perform a site survey before recommending an alarm system or any security equipment. Source: BusinessNewsDaily
Select Security System Solutions
Select solutions to the problem areas in your security system. Address lighting problems by adding motion-sensing lights to your property and removing obstructions like excessive plant growth. Add security cameras to keep sensitive areas under surveillance and use a digital video recorder to keep extended surveillance records. Upgrade locks on entrances and windows. Purchase time-clocks to keep track of employees coming and going. Multilayer your security system. Especially sensitive areas should be protected by locks, security camera surveillance and alarms. Source: Overstock.com
Other Factors to Consider
Another factor to consider is whether you want to be able to control the security features of your business off-site, whether you’re at a conference for a few days, or just home at night looking to make sure all is well at work. You could also choose to give access to these types of controls to certain employees. The choice is yours.
You’ll also want to decide whether a wireless or wired security system is the best fit for your business. If you’re in the planning phases of creating office space, workspace, or a storefront, consider security systems now. Source: AlarmRelay
Contact:
Mr. Locksmith
555 W. Hastings St
L21A
Vancouver BC V6B 4N4
Canada
Thinking about paving your driveway, walkway, patio, or pool deck? If so, you will want to consider these benefits of installing pave stones, such as: versatility, water-resistance, low material and installation cost, and beauty and durability.
Below are 4 benefits of installing pave stones:
Versatility
Due to the availability of various shapes, colors, and sizes of patio pavers, they have become one of the most versatile paving materials available today. Additionally, the combination of slip resistance and attractive finishes has aided their popularity to what they are today.
In choosing the floor material for a patio, one must be careful to properly consider the safety, comfort, style and design issues of the patio surface. Patio pavers address all these factors because they have a non-slip surface, they are comfortable to walk on, and they have a classical appearance and can be designed in a variety of patterns, shapes and colors. Source: Paversearch
Water-Resistance
Another major advantage of the paving stone is that it is water resistant and forces water to drain into the sand-filled joints. The sand-filled joints help lock the stones in place and add sturdiness while maintaining its visual appeal and flexibility, which are key factors as to why its popularity is growing amongst homeowners. Source: HomeAdvisor
Low Material and Installation Cost
The cost of Concrete pavers is much less than other type of paving products since they are manufactured with machines as compared to other naturally occurring products. Concrete pavers are usually less expensive than clay pavers, granite pavers or sandstone pavers. When considering maintenance and replacement costs, concrete pavers offer an economical long-term alternative to other types of paving options. For small and simple projects cost can be also reduced by a home owner installing the pavement themselves using installation guides provided by the manufacturer of the paver products. Source: TileTechPavers
Beauty and Durability
Beauty. They are very aesthetically pleasing. The natural color and texture variations usually found in these products add a natural beauty.
Durability. They are one of the most durable materials available. People have been using stone pavers for thousands and thousands of years. Some Roman roads paved with this material can still be seen today. Source: Landscaping.About.com
Contact:
Kerrisdale Roofing and Drains
8279 Ross Street
Vancouver, BC V5X 4W1
Office: 604-360-2114
Here are some Mother’s Day activities, songs, and books for kids from around the web!
People email me each year asking for Mother’s Day activities. The truth is I’m not really a crafty person. Maybe I should work on that. 
Links open in a new tab or window.
Flower Pot Art (PreKinders)
Thumbprint Keepsake (Pre-K Pages)
Sugar Scrub for Kids (Pre-K Pages)
Fingerprint Bee Mother’s Day Card (Crafty Morning)
“You Light Up My Life” Card (Crafty Morning)
Handprint Flower Poem (Crafty Morning)
Handprint Flower Pot Craft (In the Playroom)
Lavendar Hearts (Teaching 2 and 3 Year Olds)
Mother’s Day Celebration with Toddlers (Teaching 2 and 3 Year Olds)
Celebrating Mother’s Day in Preschool (Teach Preschool)
The PreKinders Mother’s Day Pinterest Board
The Kiboomers have an entire Mother’s Day song playlist! Check it out!
Mother’s Day, by Jack Hartmann
The post Mother’s Day Activities for Kids appeared first on PreKinders.
Automotive locksmiths provide different kinds of services, including: replacement car keys, transponder keys, ignition related services and emergency lockout rescue services.
Below are 4 common locksmith services:
Replacement Car Keys
Majority of the car keys today are equipped with and electronic chip that can help determining the car in case of car theft. But if at some point, the chip just stops working unexpectedly, the whole key becomes useless. In such situations, you need a replacement car key so that you can get on the road as fast as you can and Charlotte Locksmith provides you with that service. Source: LinkedIn
Transponder Keys
Replacing a transponder key for your vehicle is not as simple as getting a new key cut to match your ignition. This process should be performed by a trained professional in order to ensure the key will function properly and start your vehicle. Not only are our car key replacement services cost effective, but we can complete the job much quicker than the competition or the dealer. Source: PopaLock
Ignition Related Services
American Best Locksmith Company does not only handle ignition key replacement our auto locksmith specialist have the abilities to provide any kind of automotive locksmith services on all types of vehicles including but not limited to ignition changes, auto door lock repair, car unlock service, ignition keys programmed and broken key extraction. All of our technicians make sure that their mobile service unit is always filled with all the proper tools and parts they will need to handle all automotive locksmith services you require so you will never need to wait for the part to come in for us to get you back in your vehicle. Source: TopMasterLocksmith
Emergency Lockout Rescue Services
If your car keys have been accidental locked inside your vehicle than a MLA approved locksmith will be able to help you enter the vehicle via picking the lock, which is a skill that only a trained locksmith can do. An auto car locksmith should be able to gain entry to any make or car/vehicle. (van / truck) Source: Locksmiths.co.uk
Contact:
Automotive Locksmiths
The post 4 Common Automotive Locksmith Services appeared first on Automotive Locksmith.
Should I buy and flip?
Should I buy for cash flow?
How about buy, fix and flip?
NO! The #1 Most Asked Question is… What Should I Invest In?
It’s like meeting a stockbroker and saying “what stock should I buy?”
There are a tonne of investment vehicles in the stock market, just like there are tonne of investment vehiAcles when it comes to real estate.
You see, when I work with my clients, I keep it simple.
Are you buying for cash flow OR capital appreciation?
There are a lot more factors that I consider. What’s your risk tolerance? Where do you like to invest? Where would you like to specialize in? Do you like short term or long term investments? How hands on are you? Do you like being a landlord? Are you good with numbers? What is your 2 year, 5 year and 10 year goal? How many properties do you want to own at the end of 10 years? And the list of questions go on and on…
You see, it’s my goal to help investors generate quick profits through a buy and flip strategy and accumulate long term wealth through a buy and hold and various cash flow strategies.
The post The #1 MOST ASKED Real Estate Investing Question… appeared first on Gary Wong Realty Vancouver, BC.
Felt’s highlight for Sea Otter wasn’t a completely new model. Instead, it was this deep green limited edition Decree LE trail bike. Only 25 of them will be made, carrying a retail price of $6,499. Spec includes a DVO Diamond fork and Topaz 3AIR shock, new Spank Oozy 345 Trail wheels, handlebar and stem, KS […]
The post SOC16: Felt shows limited edition emerald Decree mountain bike, adds Eagle 1×12 spec & more appeared first on Bikerumor.
Aaron Baker was a motocross athlete who was paralyzed in training in 1999. When he crashed, Baker broke cervical vertebras 4, 5 and 6, rendering him quadriplegic. Despite virtually zero chance of regaining any function below the point of injury, Aaron focused his mind and energy on regaining function and now walks intermittently with cane […]
The post Aaron Baker’s monstrous Honey Badger mountain bike trike by Adaptive Reactions appeared first on Bikerumor.
Life has a funny way of working out sometimes. I first met Tom Swallow in college and convinced him that he should come work with me at a bike shop that I had been at since first starting in the industry. It was at that shop that he met Sarah after she was hired on […]
The post Specialized Adventure Dispatch: Sarah Swallow rides S24O through Humboldt Redwood State Park appeared first on Bikerumor.
Did you catch the launch of the new Santa Cruz Tallboy this morning? If you overslept like Greg, you should catch the rest of the video then head over to read about the new Tallboy and its sister, the Juliana Joplin. If you ask us, it looks like Greg may have had a bit more […]
The post Greg Minnaar takes the new Santa Cruz Tallboy for a South African Epic of his own appeared first on Bikerumor.
In what surely must have seemed like the start of end times for dealers, yesterday it was pointed out that Trek mountain bikes were for sale online. But not just any online store – on the “Shocking Value” section of the Sam’s Club mobile store. The news quickly spread through Facebook as more people seemed to share […]
The post After bikes show up for sale at Sam’s Club, Trek says ‘Not so fast’ appeared first on Bikerumor.
Every so often you want to haul more than normal. And sometimes it may be for long distances. If that is the case, your race ready, carbon-everything road bike may be the ideal tool, but it’s one of the least adaptable bikes for more than a seat bag, and wearing a backpack for more than 20 minutes […]
The post Tailfin slices up new rack and pannier system made especially for carbon road bikes appeared first on Bikerumor.
(Editor’s note: Sometimes, the product description from our readers says it all. This is one of those times. Enjoy!) My name is Nick Hand, and I designed this kit for the 4th of July. It is very over the top, it was conceived during a 4th of July ride last year and after a few […]
The post Hey ‘Merica, get this cycling kit to celebrate the 4th of July appeared first on Bikerumor.
The Onza Svelt 29er XC race tire was teased at Taipei, we spotted them racing at Sea Otter and got a little more detail. Designed as a fast rolling but robust XC race tire, they come in a healthy 2.25″ width for 29ers only. A 27.5″ may follow, but considering the intentions, 29er was the […]
The post SOC16: Onza Svelt mountain bike tire smooths the XC rough appeared first on Bikerumor.
Photo submitted by Dan Casioppo, “Descending the Horse Butte Trail near Bend, OR, after our attempt to reach Newberry Crater (hint: it is still covered in impassable snow).” We always love to see your photos and would like to show them to the world here on the Pic Of The Day. Send in your photo with […]
The post Bikerumor Pic Of The Day: Bikepacking Newbury Crater, Oregon appeared first on Bikerumor.
As the sister company to Santa Cruz Bicycles, it probably comes as little surprise that when the Tallboy 2 gets an update, so too does the women’s focused Joplin. For awhile now the companies have shared frame technology but with different builds suited to their target audience. For Juliana, that target is clearly the female mountain […]
The post Juliana hits the trail 29er spectrum with new Ultraviolet Joplin appeared first on Bikerumor.
For many, including those at Santa Cruz, the Tallboy has been a revelation in big wheel form. The first generation was introduced at a time when 29ers were still a hot topic of debate and it just happened to be the first 29er from Santa Cruz – a 4″ travel VPP carbon stunner. Needless to […]
The post Third generation Santa Cruz Tallboy grows slightly longer legs, ability to run fatter tires appeared first on Bikerumor.
For thirsty triathletes, you’ve never had more options for putting drinks on the bike from FSA. With two new bottle systems that sit between the aero bar extensions and one for behind the saddle, there’s plenty of hydration to be had. Above is the Vision Drink System, which integrates a Garmin cycling computer mount into […]
The post SOC16: FSA Vision adds clever aero water bottle options for triathletes, plus new wide-rim brake caliper appeared first on Bikerumor.
Oakley is a brand that really gets in the spirit of major athletic events. Bikerumor has previously checked out their special edition Tour De France sunglass collection, and they’ve just announced a new Team USA collection adorned in red, white and blue accents to honor American athletes heading to this year’s summer games. The collection […]
The post Oakley gears up for the 2016 Summer Olympics with the Team USA Collection appeared first on Bikerumor.
The 560G titanium folding lock is named for it’s weight, just 560 grams, yet it’ll hold up to 4′ bolt cutters, freezing, chiseling and hammering with the best of ’em. Designed by two former Lehigh University students, the 560G uses Grade 5 titanium with intricate rolling links to secure your bike, yet closes and locks […]
The post 560G titanium folding bicycle lock is light weight, claims heavy security appeared first on Bikerumor.
For most of us, winter just ended so it’s time to prepare for… winter? Thanks to the nature of product cycles, some companies are already a few seasons down the road, which is why Lake gave us a sneak peek at their latest winter boot – the mighty MXZ 400. The MXZ 303 was already […]
The post SOC16: Lake warms up w/ new MXZ 400 Winter Boot, adds new CX shoes, revamped CX332, full custom 402, more appeared first on Bikerumor.
Zirbel Bike out of Switzerland has developed a new multi-function grip shift-style twist shifter to control electronic drivetrains. The Velocity Racer shifter is targeted at road bikes with bull horn bar setups, but has also been installed in flat bar setups. Not content with compatibility with one system, Zirbel have developed versions to control Shimano […]
The post Zirbel Velocity Racer twist shifting to control Di2, EPS, or even eTap electronic shifts appeared first on Bikerumor.
Over the past few years of tradeshow visits, we’ve continually asked the holdouts like Continental, Michelin, Mavic and, yes, Panaracer, when they’re going to finally have road tubeless tires available. One of the main reasons cited by all of them is a lack of standards for the rim-and-tire interface, particularly with regard to tire bead […]
The post New Panaracer EVO3 road tubeless tire focuses on the bead appeared first on Bikerumor.
When it comes to industry experience, newly formed wheel company Knight Composites has it in spades. The newly formed super group includes industry veterans Jim Pfeil, Beverly Lucas, and Kevin Quan who combined have loads of experience with companies like Reynolds composites, EDGE and ENVE, Diamondback, and Neilpryde. Together, they’ve each made contributions to changing […]
The post SOC16: Knight Composites forms new 35mm road and CX tubulars, shows super light 27.5+ Rim appeared first on Bikerumor.
In 1979, Norma Kenney, locally known as “The Velvet Steamroller”, founded the Mission Heritage Association (MHA), with a mandate to preserve the area’s local heritage. Through this Association, Kenney became the driving force for preserving a particular piece of crown land that was slated for high-density development. Under the charming and persistent leadership of Norma Kenney, the MHA lobbied the government to conserve the site formerly used by the St. Mary’s Mission and Residential School; and in 1986, forty-four acres of the original land became what is now the Fraser River Heritage Park. The following year, Rob Littler, the founder of Artisan Log and Timber Homes, taught his very first log home building course. Eventually, Rob and a dozen of his eager students built The Norma Kenny House, named after Norma to honour her commitment to founding the MHA, and her perseverance in achieving the dream of having the St. Mary’s property designated as a park. This beautiful log home, located at Heritage Park in Mission BC, boasts stunning views of the Fraser Valley and surrounding mountains, most notably the majestic Mount Baker.
in our dad’s footsteps to restore the Norma Kenney House, using the same hard work ethic and high standards as Norma Kenney herself. Operating under the direction of Chef de Cuisine, Kerry D. Martin of Kela Cuisine Inc., The Blackberry Kitchen is undergoing a much needed facelift, as we re-purposes the 1200 square foot log building into a gourmet restaurant. and provide a much needed facelift to the Blackberry Kitchen. Renovations include removing the existing log floor to re-use the logs as new structural posts, and opening up the entire space to make it much more inviting and open overall. With our commitment to quality workmanship and honouring the mission of Norma herself, we are excited to introduce the Mission community to the new Blackberry Kitchen, where both the food and views still delight the senses, as you surround yourself with the warmth and light of this beautiful building.
If you are ever traveling through the Mission B.C. area we highly recommend that you stop in for a meal at the Blackberry Kitchen to enjoy one of the best home cooked meals you have ever had and take in the beautiful Fraser Valley scenery.
Wasting no time since the bike’s initial release last fall, Ventana has rolled out a new option for the Wolfram 27+. Alongside the standard Wolfram (which is hardly standard with a belt drive Rohloff option), the new version adds in a gearbox. Specifically the Pinion P1.12, though P1.9 and P1.18 gearboxes will be available on […]
The post SOC16: Ventana Wolfram 27+ gets the Pinion gearbox makeover appeared first on Bikerumor.
Hailing from Pemberton, B.C. Dissent Labs is a small brand that has some big names (like Brandon Semenuk, Mike Hopkins, Remi Gauvin, and Bas and Tom Van Steenbergen) backing their products. Dissent Labs was formed when company owner Josh Hall decided to create a line of high quality socks that would keep serious athletes as […]
The post Dissent Labs 8” Supercrew and Semenuk GFX Compression Socks appeared first on Bikerumor.
With seemingly ever changing standards, it’s nice to see something that’s virtually future proof come along. The new FSA modular mountain bike cranks are just that, using a simple spacer system to adjust chainline to work with Boost and non-Boost bikes equally well. And thanks to their interchangeable spindle, spider and chainring system, they should […]
The post SOC16: FSA adds modular cranks (Boost, no Boost, no problem) plus dropper & more appeared first on Bikerumor.
If you haven’t checked out Breezer’s pavement collection lately, it’s worth a look, particularly the very svelte Liberty hybrid city/commuter bikes. Now, bridging the gap between those and their mountain bikes and jumping straight into the popular gravel segment is their first modern road bike, the Inversion. Built with Breezer’s D’Fusion double butted chromoly and […]
The post SOC16: New Breezer Inversion flips the gravel switch w/ butted steel road frame appeared first on Bikerumor.
Photo submitted by Mark Emerson, “2016 Giant Reign Advanced 1. Rotorua, New Zealand.” We always love to see your photos and would like to show them to the world here on the Pic Of The Day. Send in your photo with a brief description of the bike and your location here.
The post Bikerumor Pic Of The Day: Rotorua, New Zealand appeared first on Bikerumor.
When planning a new bathroom or updating your existing bathroom the first thing to consider is the style you want to achieve.
Read below to learn about 5 inexpensive ways to make your bathroom luxurious.
Natural Accents
Natural stone counter – A soapstone top, with its river rock color and matte finish, has a warmer look than polished granite. Cut one to your specs using woodworking tools.. Source: ThisOldHouse
Two Shower Curtains For a Grander Tub
Shower curtain panels make for a far more luxurious bath experience. For a tiny bathroom, just cut the curtain in half and hem the edges. Easy peasy. Source: Buzzfeed
Arrange Artfully
Consider your counter: Are your beauty and hygiene supplies just strewn about randomly? If so, adding a few small trays can mean the difference between a mess and an artful arrangement. And don’t write off apothecary jars just because they’re a cliche — they’re a beautiful way to display the small but necessary items that often come in gaudy packaging (cotton balls, q-tips). Source: ElleDecor
Fresh Flowers and Greenery
This trick may sound too easy, but you’ll be amazed at how much a little plant life can go a long way in making your bathroom much prettier and vibrant. Source: RedbookMag
Mirror Power
A large mirror has so much power. It cuts down on tile costs by filling much of a wall (while reflecting the material you do invest in) and can virtually double the size of the room, making it feel like a vast personal oasis even if the room is a more modest size. Consider taking a mirror wall to wall. Source: Houzz
If you’d like more information on how to make your bathroom look luxurious in an inexpensive way, please contact us.
Contact Us:
Perfect Bath
Phone: Toll Free 1-866-843-1641
Calgary, Alberta
Email: info@perfectbath.com
The post 5 Inexpensive Ways to Make Your Bathroom Luxurious appeared first on Perfect Bath Canada.
