There are certain home repairs that are unavoidable over time and every homeowner will eventually face them. In this short post we’ll discuss some common home repairs, including: holes in walls, sticky doors, stuck sliding windows, creaky floorboards and roof problems.
Below are 5 common home repairs:
Holes in Walls
Holes in walls are nearly unavoidable, even if you’re only renting. However, unless you’ve done plowed a car through it, you can fix most holes pretty cheaply. The simplest holes to fix are going to be screw or nail holes from hanging everything from pictures to TVs. For holes like these, you’ll want to clean the area of any debris and wipe down the wall. Use a putty knife to press some spackle into the wall and let it dry. Once it’s done, use some fine grain sandpaper to sand it down until it’s nice and flat. Depending on how seamless you need it to be and what color you your walls are, you may need to apply a coat of paint.
Larger holes can be a bit trickier. If a doorknob or fist went through the wall, you’ll need to cut out a rectangular section of the drywall surrounding the hole. Then, cut a piece of drywall from some scraps (or whole pieces you can buy at a hardware store). Source: LifeHacker
Sticky Doors
Sticking or binding doors can sometimes cause squeaks because they put extra pressure on the hinges. Hinges can also get noisy when they begin to oxidize. If your door hinges announce anyone entering or leaving the room, you might be able to silence them with a little lubricant. First, cover the area under the door with a cloth and then apply penetrating oil to the hinges. Be sparing at first. After applying a few drops, open and close the door to work lubricant into the moving parts of the hinge. Give it a couple of minutes, and try opening and closing the door one more time. If there’s still a squeak, apply a few more drops and go through the process again. Source: HowStuffWorks
Stuck Sliding Windows
A little silicone spray lubricant (sold at hardware stores) will grease the skids. Spray it onto a rag, then wipe along the tracks, whether they’re metal, wood, or plastic. Source: RealSimple
Creaky Floorboards
Floorboards can creak either because their fastening screws have come loose, or because they’ve swollen and now rub against each other. Once you’ve found the problem, it’s easy to fix. If a floorboard covers an area of pipes or cables, fixing it with a screw instead of a nail will allow easy access. Source: HouseBeautiful
Roof Problems
The roof of your home may contain old or damaged shingles and improper flashing due to rain. The overall structure of the roof may be affected because of improperly installed collar ties and ridge beam supports. Source: HandymanProfessional
Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114
from Kerrisdale RD http://ift.tt/29fiOYD